Keyboard Cable For Mac

  1. It’s easy to install. Just unscrew the back casing (you do need a special screwdriver that can also be bought on Amazon for a few bucks). The cable itself just plugs in after unscrewing a couple small screws holding it in place. The 3rd-party vendor cable that Apple installed in many Macbook Pros were crap.
  2. Description Replace a torn or damaged cable that connects the trackpad to the logic board in your Mid 2013 to 2017 13' MacBook Air. This cable carries input from other upper case components as well, so a damaged trackpad cable may affect the functions of the keyboard and power button.

Apple Magic Mouse 2, Magic Keyboard, Magic Keyboard with Numeric Keypad, and Magic Trackpad 2 work wirelessly with your Mac via Bluetooth when they're paired and turned on.

A Mac keyboard with mechanical switches Azio Mk-Mac Wired USB Backlit Keyboard with Brown K-Switch. Have you ever heard of a mechanical keyboard for the Apple Mac? If you haven’t, this Azio MK-Mac keyboard should put you on track. Mechanical key switches are popular among gamers and typists in the world of Windows computers.

If your devices came with a new iMac, they're already paired with the computer. Just turn them on when you first turn on your Mac. To make sure that your device is turned on, check its power switch. If green is visible, the device is on.

If you bought your devices separately — or if they've become unpaired from your Mac — follow the steps below to pair them.

How to set up current Apple wireless devices

Follow these steps to set up your Magic Mouse 2, Magic Keyboard, Magic Keyboard with Numeric Keypad, or Magic Trackpad 2:

  1. Connect a Lightning to USB Cable1 or a USB-C to Lightning Cable to the Lightning port on the device2 and connect the other end of the cable to your Mac.
  2. Make sure that the device's power switch is in the ON position. (Green is visible under the switch when the device is on.)
  3. Choose Apple () menu > System Preferences, then click Bluetooth to open the Bluetooth preferences window. When the device pairs with your Mac, it appears in the list of devices.
  4. Check the Bluetooth preferences window to see your device's charge level. When the device is charged, unplug it for wireless use.
Macbook

1. If your Bluetooth device came with an iMac, a Lightning to USB cable was also included in the box.
2. Magic Mouse 2 can't be used while connected to the cable.

How to set up earlier Apple wireless devices

If you're not sure which device you have, you can learn how to identify your Apple wireless mouse, keyboard, or trackpad.

Then use a wired mouse or trackpad — or the built-in trackpad if you're using a Mac notebook — and follow these steps to set up your earlier Apple wireless devices (such as the Apple Wireless Keyboard, Magic Mouse, and Magic Trackpad):

  1. Turn on your device.
  2. Wait until your device's LED starts blinking, which means that it's in Discoverable Mode. (If the LED is on but not blinking, your device is already paired with another host. To unpair it, choose Apple menu > System Preferences, then click Bluetooth. Hover the pointer over the device you want to remove, then click the button that appears next to the device's name. Turn the device off, then start again at step 1.)
  3. Choose Apple menu > System Preferences, then click Bluetooth.
  4. Wait while your Mac searches for your device. When your device appears in Bluetooth preferences, click Pair1.

Trackpad Cable For Macbook Pro

1. Apple Wireless Keyboard requires the passcode that appears on your Mac. Enter the 8-digit passcode on the keyboard, then press Return. Earlier models of Apple Wireless Mouse or Apple Magic Trackpad will connect automatically or show a dialog. If you see a dialog, click Pair or press Return.

Wired Keyboard For Mac

Learn more