Create Bootable Usb Drives For Mac

Reasons for Mac Boot from USB. Booting the Mac from USB in a way gives the power back to the. If you want to do a clean install of macOS Sierra, or you have multiple Macs to install it on, then a bootable flash drive for is your best bet for easy installation. Here’s how to make one.

Sep 21, 2020 • Filed to: Solve Mac Problems • Proven solutions

Creating a bootable drive for your Mac certainly seems to be a wise decision to make. Even though the macOS recovery partition can take care of all your recovery requirements in times of need, it’s still worthwhile to have a bootable installer.

Why Do You Need to Create A Bootable Drive For Your Mac?

  • The Mac installer gets deleted as soon as you download it and use it by installing the Mac operating system. Once the installer gets deleted, it means that you can no longer use it to install the macOS on another Mac device. You will have to again download the installer on the latter Mac to install the macOS. This can take a lot of time and become inefficient if you have multiple Macs.
  • Clean installs can be performed by installers which are very helpful in overwriting your start-up drive. You can also use this function for other troubleshooting issues as well.
  • When you have a bootable installer, it ensures that you are well guarded in an emergency scenario by making use of some of its helpful utilities.
  • A bootable installer can allow you to install an earlier version of macOS and also let you temporarily boot into the previous version of the macOS.

What Do You Need Before Creating Your Bootable Drive?

Before you begin the process, you will need the following:

  • USB Stick / External Hard Drive: If you are planning to use a USB for downloading the bootable version of the installer, make sure that it is 8GB in size or larger than that. In the case of Sierra, 12GB is recommended as the minimum requirement. Ideally, 32GB to 64GB is a good size to have as it is not only cost-effective but also gives a better performance. In the case of an external drive, you can use any spare one that you are not going to use for any other work.
  • Download macOS High Sierra Installer: It is important to note that once you have downloaded the installer, it will begin with the installation process on its own. You can close the installer just like you quit any Mac app. In the case of the macOS version being older than the current one, you can click on ‘ok’ once the message flashes that the version is too old to install. You can find the old installer file in your ‘Application Folder’. Don’t forget to take a backup of your Mac to be on a safe side.

Mac Create Bootable Usb From Iso

Part 1. How to Create a Bootable Drive Using Terminal

There are two ways of creating a bootable copy of the installer. You can either use Terminal or get the job done through a free software like Recoverit to do it for you. First, let us look at how to create a bootable drive using Terminal.

Steps to create a macOS Siera beta boot disk:

  1. The first step in the process is to connect your external hard drive to your Mac. You need to name your external drive ‘untitled’ for the Terminal command to work.
  2. Launch Terminal. You can find this in the 'Utilities' folder of your Applications folder.
  3. Copy the following instructions now:
sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install macOS Sierra.app
  1. In this step, you have to paste the copied instruction on the screen by going back to the Terminal.
Create a bootable usb drive for macos high sierra easy step by step
  1. You will be required to feed in your user password now and then hit ‘Return’.
  2. Now, the Terminal will ask for your permission to erase the drive. To continue, type ‘Y’ and again hit return.
  1. After the Terminal has erased your drive, your Mac will prompt you if you wish to use the drive for Time Machine. Click ‘Don’t Use’.
  2. Next, the installer file will be copied by the Terminal to your drive. This might take some time, so be patient.
  1. Once the copying is completed, a ‘Copy complete’ message will be displayed on your screen. You can now quit the Terminal and use your drive.

Part 2. How to Create Bootable Media for Mac with Recoverit Mac Data Recovery

Recoverit Mac data recovery software is one of the most impressive and easy-to-use data recovery software in the market, and it has lots to offer with its varied utilities and functions. With Recoverit to create bootable media, you can access your system easily without the need to reinstall the macOS to recover your lost data.

Step 1 Launch Recoverit and get to select 'Computer Crash Recovery'. Click 'Start'.

Step 2 Choose your connected external hard drive as the bootable media, and click 'Start'. You will receive a requirement of formatting the device. Before the formatting, remember to back your drive data up.

Create Bootable Mac Os Usb On Windows

Step 3 Wait for a while, and Recoverit will format your drive and start creating the bootable media.

Step 4 Once it finishes, follow the next steps to restore data.

Part 3. How to Set the Computer Boot from the Bootable Media

Step 1 Connect your external drive to your unbootable Mac.

Step 2 Press down on the ‘Option’ key after restarting your Mac.

Step 3 Once the booting has finished, your Mac will display the Startup Manager to show you the available boot drives. Select your external hard drive and hit ‘Return’.

Step 4 If you want to install Sierra but keep your data untouched, you can select 'Install OS X'. However, if you wish to delete all your data, then you can select Disk Utility to format the entire drive and wipe away all your data to reformat the internal drive first and then install macOS Sierra.

You now have a bootable copy of the macOS Sierra installer, and you can use it on multiple Macs to install the Mac OS. If you are familiar with the command line, you can opt to create a bootable drive using Terminal. For others, you can simply opt for reliable Mac hard drive recovery software like Recoverit and assist you in recovering your data as well from crashed systems in case of emergencies.

What's Wrong with Mac

Recover Your Mac
Fix Your Mac
Delete Your Mac
Learn Mac Hacks

If you’re using both Windows and macOS, you’ve to deal with when mac refuses to boot. The reason behind can be from a number of things that could go wrong. This includes system failure, bad updates, power failure, hardware failure. Unless there is a hardware problem that only can be diagnosed at the apple center you can fix your Apple computer.

It is an excellent practice always to have a bootable macOS USB, which you can easily create using macOS operating system. But since we’re here, you probably can want to make bootable USB using Windows 10. Let’s be real, and there are more Windows computers compared to MAC. Fortunately, you can use a Windows computer to create a bootable USB flash drive.

In this article, we’ll help you with the instructions to create a bootable MacOS USB installation media from a Windows 10 computer. So that you can use that USB to install or reinstall (upgrade) Apple’s MacOS. You can create a macos Catalina/sierra bootable USB using this guide to fix your operating system.

What’s needed?

You will need a few things before you get started. The first essential thing in it is a USB drive would be awesome if you use a USB 3.0, but you can get the work done using slow USB as well. So, in contrast, you need these following things.

  1. One high-quality USB flash drive with 16GB of storage.
  2. TransMac software.
  3. MacOS operating system image (DMG file).

How to Create a macos Catalina bootable usb

The guide is simple and straightforward if you follow thiese step.

Download and install TransMac on your Windows PC. It’s paid software with 15-day trial, so you can use it within the time to create a bootable MacOS USB flash drive. If you like the software and to support the developer you can buy the full version.

Plug the USB drive to your Windows computer that you’ll be using to fix your MacOS. And we are going to tell you something straightforward – backup if things stored in USB Drive.

Step 1. Open the TransMac, and select Run as administrator. If you’re using the trial version, wait 15 seconds, and click Run.

Step 2. Use your USB drive right-click on it and select format disk format this will format the USB drive so that it can be used to store the Mac OS operating system. One thing you need took care of that the USB drive needs in GPT partition in order to work on a Mac computer otherwise it won’t boot.

When it prompts select a name for your USB it doesn’t matter but just do it and click ok. If the formatting completed successfully, click OK to continue.

Step 3. Again from the left sidebar right-click on the USB drive and select restore with disk image.

Create a bootable usb drive for macos high sierra easy step by step

Step 4. Now browse to the location where the Mac OS system image file is located and click ok to load it.

Create Bootable Usb Drives For Mac

Step 5. Click Yes to create the macOS USB bootable media.

Drive

It will take a few minutes to complete the process because the Mac Operating System is larger than any other operating systems like Windows and LINUX in size. Now plug the USB drive to Mac computer in order to install, install or upgrade the operating system to the latest version of Mac OS, which can be Sierra or later.

THE TOOL CAN

  • Apple File System (APFS) volume read support.
  • Open Mac APFS/HFS/HFS+ format disk drives, flash drives, CD/DVD/Blu-ray media, HD floppies, dmg, dmgpart, sparsebundle and sparseimage files.
  • Copy files to Mac HFS+ disks and dmg images.
    Format as HFS+ for Mac .
  • Save and restore images of disks and flash drives.
  • Create, compress, expand and split dmg files.
  • Built in burner functionality to burn ISO and dmg files directly to CD/DVD/Blu-Ray.
  • Read Mac multisession and hybrid CDs.
  • View partition layout.

How to create a GPT partition on a USB flash drive

If the USB flash drive is not working using TransMac, it could be still a partition problem. In this case, you want to redo the entire process again, but this time use the following steps to use the Diskpart command-line utility on Windows to create the appropriate GPT partition.

  1. Open Command Prompt as an administrator. Type cmd in run dialog or open it from the start menu.
  2. Type the diskpart command and press Enter. This will display that is connected to your computer.
  3. Enter the list disk command to view all drives connected to your computer and press Enter. This command will show all of the partitions inside of a disc.
  4. Type the select disk command followed the number assigned for the USB flash drive (e.g., select disk 4), and press Enter. This command will select the disc partition of your choice.
  5. Enter the clean command and press Enter. This erases and formats the disc.
  6. Type the convert GPT command and press Enter. This convert master boot record to new GPT.
  7. Enter the create partition primary command and press Enter to complete the process.

Quickly create a macOS bootable USB on Windows

Now make bootable USB using the TransMac software (follow instructions that are given above). Now connect the USB and power on your Mac computer while holding the option key and then select the USB Flash media to run the installation.

Learn using USB on MAC (Apple support page)

Learn more about making bootable USB.

Contents