Commands For A Mac Computer

You’ve made the switch to Mac OS X Lion from some version of Windows. Mac OS X is easy to learn, but Windows users may find a few of its keys and navigation elements a little mystifying at first. Use this Cheat Sheet to figure out Mac OS X keyboard symbols and shortcuts and to master Multi-Touch gestures to control your new Mac from its trackpad.

Deciphering Special Key Symbols in Mac OS X

We can find mac address (physical address) of a computer using the command ‘getmac‘. This can be used to get mac address for remote computers also. Below are few examples on how to use this command. It works on XP, Vista, Windows 7, Server 2003 and Server 2008 operating systems. Get mac addresses from CMD.

Using keyboard shortcuts in Mac OSX means recognizing some important keys, such as Control, Shift, Escape, and more. The symbols for these Mac keys don’t look the same as they do on a Windows keyboard. Mac menus show keyboard shortcuts, when they’re available, using the following standard symbols for special keys:

Commanding Keyboard Shortcuts on a Mac

  • The command line (or Terminal for you Mac fans) is a throwback to a simpler age of computing, before mouse pointers and application windows and desktop wallpaper.Back when it was just you and a.
  • S Mac computers incorporate a wide range of keyboard commands designed to access functions in Mac OS X Snow Leopard and Macintosh applications. These commands reduce your need to rely on a mouse, trackball or other input device to operate your computer.

Most Windows keyboard shortcuts, which require you to press Ctrl and a letter, work on a Mac if you press the Command key (the one with the four-leaf clover symbol) on the Mac instead of Ctrl. Thus, Command+C is copy, Command+X is cut, Command+V is paste, Command+Z is undo, and so on. Some shortcuts that are unique to the Mac include the following:

How to Give Commands with Mac Function Keys

A Mac keyboard has function keys, just like a Windows keyboard, but the keys likely issue different commands in Mac OS X than in Windows. On a Mac, the commands assigned to function keys vary by the keyboard’s size and manufacturer. Check Keyboard and Mission Control in System Preferences for your settings. The table shows typical default commands for function keys in Mac OS X Lion.

(Note: These commands work only on Apple-labeled keyboards, except for the Turn on VoiceOver command, which works on any keyboard.)

Navigating Mac OS X with Multi-Touch Gestures

Multi-Touch gestures are moves that you make on a Mac’s trackpad to send Mac OS X commands, mostly for navigating the Mac OS X interface. When you switch to a Mac from Windows, adjusting to Multi-Touch takes a little practice, so this table is here to help you:

GestureCommand It Performs
Two-finger swipeScroll (up, down, left, or right)
Two fingers on keypad+clickRight click (same as Control+click)
Three-finger swipeSwitch spaces or open applications
Three-finger double tapLook up a word in the dictionary or on Wikipedia
Four-finger swipe upShow Mission Control
Four-finger swipe downShow all windows for the current application
Four-finger pinchShow Launchpad
Four-finger spreadShow Desktop
Computers

Top Mac OS X Hints for Windows Users

Windows users who have made the switch to Mac OS X have some new mouse clicks, keyboard techniques, and touchpad (trackpad) gestures to learn. Have a look at some top tips for working on a Mac:

  • To right-click when using a single-button mouse, hold down Control and then click.

  • To right-click on a laptop or track pad, click with two fingers resting on the trackpad. Control-click also works.

  • The top row on Mac keyboards is used for special controls, such as audio volume and brightness. To use them as function keys, hold down the Fn key. You can reverse this behavior by choosing System [email protected]@→Keyboard. The Keyboard preferences pane also has a complete list of keyboard shortcuts.

  • Closing an application’s last window usually doesn’t close the application itself.

  • Apple applications and many third-party Mac applications save your edits automatically while you work and keep track of different versions.

  • To rename a file in a Finder window, click the filename once and then press Return. The filename becomes editable.

Commands For Mac

Starting Your Mac with Boot Option Keys

Mac

When your Mac powers up, it normally uses the system on its internal hard drive unless you change this behavior by choosing System [email protected]@→Startup Disk. You can also change what your Mac does by holding down the following keys or key combinations during startup.

Print these boot option keys, because they’re particularly helpful to have when your Mac is having trouble.

We can find mac address (physical address) of a computer using the command ‘getmac‘. This can be used to get mac address for remote computers also. Below are few examples on how to use this command. It works on XP, Vista, Windows 7, Server 2003 and Server 2008 operating systems.

Computer

Get mac addresses from CMD

Just run the command getmac to get the mac addresses. Find an example below.

This command does not show mac addresses for the network connections which are disabled. You can run ncpa.cpl and check which NICs are disabled. Further, I have received comments that this command does not help identify the mac address for a specific device. For example, if I need to get the mac address for my WiFi card, output of getmac command is not helpful. We can use ipconfig command to deal with this.

Apple Computer Sale

Get mac address of a remote computer

What are the key commands for a mac computer

We can retrieve the mac addressses for a remote computer using nbtstat command.
Example:

Macbook Shortcuts List

Alternatively, We can run the below command to retrieve the mac addresses of a remote computer.

Macbook For Dummies Cheat Sheet

remote_computer : Full name of the remote computer or IP address
username and password are of the account on the remote computer.

Example:

If you do not want to specify the password, you can skip /p parameter. You will be prompted to enter the password and the command execution will take place after that.

Errors:

Mac

Using getmac command we can retrieve the mac addresses of the machines running windows OS only. If you try this for a Linux machine you would get the error “The RPC server is unavailable.”

If you provide incorrect password, the command would fail with the error message “Logon failure: unknown user name or bad password.

Commands For Imac Computer

Also Read:
Windows CMD commands reference